

Email us at
sales@boxer4racing.com
Accessories
Steel End link kit 'Front'
for Impreza 93-2001 and Legacy 93-1999. These low compliance sway bar end
links kits are designed to replace the high compliance original equipment
versions on the Impreza and Legacy. The kits utilize high tensile spring
steel link filled with ultra low compliance polyurethane bushes. Critical
hardware is replaced with high tensile components to match the higher loads.

The result is much more precise and direct roll control with up to 20% more
effective bar rate available at lower wheel deflection points. This does not
mean an outright increase in your bar rate but rather a quickening of it
effect allowing more bar rate earlier. |
$80.06
$74.99 |
Steel End link kit 'Rear' for Impreza 93-2001 and
Legacy 93-1999. These low compliance sway bar end links kits are designed to
replace the high compliance original equipment versions on the Impreza and
Legacy. The kits utilize high tensile spring steel link filled with ultra
low compliance polyurethane bushes. Critical hardware is replaced with high
tensile components to match the higher loads.

The result is much more precise and direct roll control with up to 20% more
effective bar rate available at lower wheel deflection points. This does not
mean an outright increase in your bar rate but rather a quickening of it
effect allowing more bar rate earlier. |
$80.06
$74.99 |
Alloy End link Kit 'Front'
for Impreza, Legacy and Forester. This kit utilizes a high tensile extruded
alloy link fitted with ultra low compliance polyurethane bushes. Critical
hardware is replaced with high tensile components to match the higher loads.
The result is much more precise and direct toll control with up to 25% more
effective bar rate available at lower wheel deflection points.
 |
$142.07
$129.99 |
Alloy End Link Kit 'Rear'
for Impreza, Legacy 93-1999 and Forester 98-2002. This kit utilizes a high tensile extruded
alloy link fitted with ultra low compliance polyurethane bushes. Critical
hardware is replaced with high tensile components to match the higher loads.
The result is much more precise and direct toll control with up to 25% more
effective bar rate available at lower wheel deflection points.
 |
$142.07
$129.99 |
Heavy Duty Sway Bar Mount Kit
for Impreza, Legacy 95 to 99 and Forester.
It is well known that the OEM rear
sway bar mounts can break. Aftermarket sway bars
add even higher loads, which can lead to premature cracks and mounting
failure. Fit bigger rear bars with confidence or just upgrade your OE
brackets to remove mounting flex. Specially strengthened to handle even 24mm
adjustable bars.

Available for 18mm,20mm,22mm,24mm
and 27mm sway bars. |
$122.34
$112.99 |
Rear Sub-frame Locking Bolt Kit
for Impreza, Legacy and Forester. Locks rear sub-frame to
body.
 |
$34.99 |
Ball Joint for
Impreza, Legacy, Forester and Baja.
Moog® suspension parts with M2 Technology™ have been developed specifically
for the demands of today's driving. These chassis parts feature a full-ball
metal stud and a double bearing with an exclusive metal gusher design. This
technology improves steering response by allowing smoother operation through
the products' full range of motion. Race-proven by NASCAR® teams, M2
Technology™
 |
$45.99 |
Inner Tie Rod for
Impreza 93-2001 and Legacy 90-1999. Moog
products are engineered to improve on original equipment technologies, solve
real OE problems and make installation easy. Now featuring M2 Technology,
Moog products deliver better steering response and durability than ever
before.
 |
$29.99ea. |
Eibach Alignment
Kit. Helps adjust negative camber back to
factory specifications.
 |
$29.99 |
Alignment Kit. Camber adjustment from +1.75 to
-1.75 degrees.
 |
|
$29.99 |
Solid Front End Link Kit
for Impreza, Legacy, Forester and Baja.
Solid front end links feature a precision
cut aluminum body, PTFE Teflon TM) lined spherical bearings, and a hard
anodized coating. With PERRIN Performance TM) end links your car will have a
solid connection between the control arms and the sway bar.
PERRIN Performance end links will get you maximum performance and
feel from your front sway bar.
 |
$139.99 |
Perrin
solid aluminum Rear end links
for Impreza, Legacy, Forester and Baja. Replaces
the factory plastic units. Precision cut from aluminum ensures strong
durable sway bar response. The factory plastic units bend and twist
prior to applying cornering loads to the sway bar. The Perrin rear end
links make the sway bar response completely linear. To increase response
even further Perrin replaces rubber bushings with Pre-lubed spherical
bearings.
Comes with illustrated instructions.
Spherical Bearings
allow more dramatic angles to the sway bar movements. Thus eliminating
the rear wheels from being lifted off the ground by end links reaching
bind up. Spherical bearings are only found on Perrin end links. |
|
$139.99 |
KARTBOY Customs Solid
rear drop links for WRX. This product replaces the stock (plastic with
rubber bushings) rear anti-sway bar droplinks with a solidly designed, CNC
cut 6061-T6 aluminum with stiff urethane bushings for the proper amount of
dynamic flex.
 |
Front
$114.99
Rear
$114.99 |
STi Front Strut Top mounts Group N for Impreza, Legacy and Forester
All 90-2006
 |
$74.99
each. |
KYB Rear Strut Tops for
Impreza 93-2001 and Legacy 90-1994.
 |
$49.99
each. |
STi Rear Strut Top mounts Group N for Impreza
93-2001 and Legacy
90-1994
 |
$69.99
each. |
STi Rear
Strut Top mounts Group N for
Legacy 1995-1999
 |
$109.99
each. |
Bushings
Rear Differential Support 'Front' Bushing
kit for Impreza, Legacy and Forester.

Locks rear differential support to the body. |
$37.99
$34.99 |
Rear Differential Support 'Front' Bushing
kit for Impreza, Legacy and Forester.

Locks rear differential support to the body. |
$29.99 |
Differential Support Bracket
Bushing Kit
for Impreza, Legacy, Forester and Baja. Replaces the stock
soft rubber rear differential bushings.
 |
$59.99 |
Gearbox Cross
Member Isolator Mount Kit
Impreza, Legacy, Forester and Baja.
Replaces the stock soft rubber transmission cross member
bushings.
 |
$29.99 |
Power Steering Rack Bushing Kit for Impreza, Legacy
and Forester. Polyurethane bushing kit replaces the stock soft rubber
bushings for quicker steering response.
 |
$29.99 |
Rear Lateral Link Bushings Kit for Impreza, Legacy and
Forester. Polyurethane bushing kit replaces the soft rubber for improved
handling.
 |
$129.99 |
Anti-Lift Kit for
Impreza, Legacy and Forester. The Whiteline Anti-Lift kit
adds positive caster for improved turn-in and steering
precision.
 |
$247.95
Comfort
$229.99
Race
$259.99
|
Front Control Arm 'Rear' Bushing
for Impreza, Legacy and Forester.
Super Pro is a
polyurethane elastomer base material, and is a class of "Thermosetting"
synthetic polymer that involves the reaction of various types of isocyanate
resin with curing agents, to give an extremely durable material with the
best features of rubber and plastic. Super Pro is unique, it is the only
polyurethane product range fully backed by a professional research and
development program based on many years of hands on experience in the
suspension industry.

Design features such as bullet grooves,
knurled and spiral bores and grease grooves ensure that the product performs
to the highest standard without transmitting any excess noise, vibration and
harshness (NVH). |
$139.99
$119.99
|
Positive Steering Response System for Impreza, Legacy and
Forester. The Perrin
Positive Steering Response System will provide correct alignment angles
preventing front end lift under hard acceleration.
 |
$249.99 |
Rear Trailing Arm 'Front' Bushing
for Impreza, Legacy and Forester.
Super Pro is a
polyurethane elastomer base material, and is a class of "Thermosetting"
synthetic polymer that involves the reaction of various types of isocyanate
resin with curing agents, to give an extremely durable material with the
best features of rubber and plastic. Super Pro is unique, it is the only
polyurethane product range fully backed by a professional research and
development program based on many years of hands on experience in the
suspension industry.

Design features such as bullet grooves,
knurled and spiral bores and grease grooves ensure that the product performs
to the highest standard without transmitting any excess noise, vibration and
harshness (NVH). |
$49.99 |
STi Transmission
Mount Group N for 5-speed for Impreza, Legacy and Forester
 |
$78.00 |
STi Motor Mounts Group N for Impreza, Legacy and Forester.
 |
$69.95ea |
Energy
Suspension Master Bushing Kit for the Impreza and
Forester
HYPER-FLEX™
is Energy's new, unique and
technically advanced chemical formulation polyurethane. It's the newest
generation of polyurethane that's thoroughly performance tested and race
proven.
 |

IMPROVES:
•
Quick Off-The-Line Starts
•
Handling
•
Stopping Control
•
Alignment Longevity. |
For those applications where component
twisting typically occurs, their line of black
HYPER-FLEX™
polyurethane products contain graphite. This
graphite impregnation delivers a self-lubricated effect, reducing the need
to lubricate the components.
Kit includes: Front control
arm bushings, rear sway bar bushings 20mm, end link
bushings, rear trailing arm set and shifter bushings. |
$149.00 |
Control Arms
Adjustable Rear Lateral Control Arms
for Impreza, Legacy and Forester.
Avoids excessive rear sway bar link
pre-load and failure found with other brands while using stronger than OE
link mounts. Whiteline kits are specifically
engineered for serious use and larger sway bars.

Set of 4 Arms |
$452.55
$399.99
|
STi
Aluminum Control Arm Kit
for 1993-2001 Impreza Sedan and Wagon.
Aluminum front
control arms provide a significant reduction in unsprung weight without
sacrificing strength and reliability. This allows the strut to work more
effectively and to run cooler under severe conditions. Kits are complete
with both arms and all parts necessary to convert from steel control arms.
 |
$999.00 |
STi
Sport Lateral Link Set,
6-piece
kit for Impreza, Forester and Legacy 93-1999.
The six piece STi rear lateral link set
upgrades all 8 link bushings to pillow ball type joints (spherical bearings)
sealed against dirt intrusion. Also includes metal (w/ uni-ball
joints) rear sway bar links with adapter brackets.
With ultra-low compliance joints, this lateral link set significantly
improves rear alignment control, handling response, and feedback
 |
$517.00 |
STi
Sport Lateral Link Set, 4-piece
Kit for Impreza, Forester and Legacy 93-1999.
The four piece STi lateral link set
upgrades 6 of the link bushings to pillow ball type joints and the remaining
2 bushings (rear outer bushings) to STi group N hardened bushings. Utilizes
the stock sway bar links.
 |
$389.99 |
STi
Sport Trailing Link Set
for Impreza, Forester and Legacy 93-1999.
Replaces front trailing link bushing with
pillow ball joints.
 |
$329.00 |
Springs
STi
Lowering Springs for
Impreza 93-2001. STi
lowering springs provide the ideal compromise between sport handling and
daily driver comfort. Springs feature moderately increased spring rates over
stock and typically about a 3/4" average ride height drop.
 |
$389.00 |
STi
Lowering "Tarmac' Springs for
Impreza 93-2001.
These springs feature more aggressive spring rates tuned for autocross and
track use. Generally considered by STi to be too aggressive for use with any
stock strut.
 |
$389.00 |
STi Lowering
springs for 2003 Forester. Lowers 1.0"
Front and 1.0" Rear.
 |
$379.00
Special order only 4-6
weeks. |
H&R
Sport Spring Set of 4 for Impreza Avg. lowering 1.8 Front 1.5 Rear
 |
$269.00 |
H&R
Sport Spring Set of 4 for Legacy Avg. lowering 1.25 Front 1.0 Rear
 |
$279.00 |
Eibach Pro-Kit Spring Set of 4
for Impreza Avg. lowering 1.0 Front 1.2 Rear
 |
$269.00 |
Eibach Pro-Kit Spring Set of 4
for Legacy Avg. lowering 1.2 Front 1.2 Rear
 |
$269.00 |
Sway Bars
Front Sway Bar 22mm
for Impreza RS/TS and 2.5i 93 to 2007, Legacy 90 to 1999, Forester 98
to 2003. Includes
Polyurethane bushings.
 |
$193.37
$179.99 |
Adjustable Rear Sway Bar
for Impreza RS/TS and 2.5i 93-2007. Adjust from 20-22mm. Includes
Polyurethane bushings.
 |
$193.37
$179.99 |
Adjustable Rear Sway Bar
for Legacy 93-2004. Adjust from 18-20-21mm. Includes
Polyurethane bushings.
 |
$193.37
$179.99 |
Adjustable Rear Sway Bar
for Forester 98-2007. Adjust from 20-22-23mm. Includes
Polyurethane bushings.
 |
$193.37
$179.99 |
Cusco
Adjustable Rear Sway Bar
w/bushings for Impreza '93-2001' Adjust from 22-24mm
 |
$169.00 |
Cusco
19mm Rear Sway Bar
w/bushings for Impreza '93-2001'
 |
$169.00 |
Cusco 21mm Rear Sway Bar
w/bushings for Impreza '93-2001'
 |
$169.00 |
Cusco
18mm Rear Sway Bar
w/bushings for Legacy '90-99'
 |
$169.00 |
Perrin
Rear Adjustable Sway Bar Kit
for Impreza and Forester.
The key to making your all wheel
drive car turn better comes from replacement of the rear sway bar.
By increasing the diameter and leverage, more cornering force is
applied to the outside wheels. Thus forcing the car to "turn-in" better.
Additionally reducing sway also increases the contact patch of the rear
tires. The all wheel drive system uses the additional traction to push
the car better through the turns.

THESE MOUNTS PREVENT INCREASED SWAY FROM THE FACTORY MOUNTS BENDING AND
IN SOME CASES BREAKING COMPLETELY.
The Perrin rear sway bar goes one
step further than simply making the bar bigger. Although size is
increased from 20mm to 22mm (7/8"), Perrin has
added the flexibility of changing the bars leverage with 3 different end
link attachment points. This allows the end user to custom tailor the
way his or her car handles. |
|
$234.99 |
| Genuine Subaru 20mm Rear Sway
Bar w/bushings for Impreza '93-2001' |
$138.00 |
| Genuine Subaru 18mm Rear Sway
Bar w/bushings for Impreza '93-2001' |
$118.00 |
| Genuine Subaru 18mm Rear Sway
Bar w/bushings for Legacy '95-99' |
$164.00 |
Strut Bars and Bracing
Cusco Front strut tower bar Type OS for Impreza, Legacy and Forester.
 |
$159.00 |
Cusco Rear
Strut Tower Bar Type OS for Impreza, Legacy and Forester.
 |
$159.00 |
Cusco Rear
Strut tower bar 40mm for Impreza, Legacy and Forester.
 |
$195.00 |
Cusco Rear
V Bar for added rigidity. This is a add on piece for the Cusco rear strut tower bars.
Designed to triangulate the rear of the car for additional rigidity, this piece is
compatible with all the Cusco rear strut tower bars. Minor drilling of the trunk will be required for installation.
 |
$129.00 |
Cusco Rear Lower Arm Bar for
Impreza, Legacy and Forester. Stabilizes the rear cross member. Mounts in existing holes
in the rear cross member.
 |
$59.00 |
Struts
KYB GR2 Struts for Legacy
92-1999 Set of 4 '2WD and AWD'
GR-2 gas shock complete struts are affordably priced, twin
tube designs that blend a smooth ride quality with enhanced road control. A
low-pressure gas charge and patented check valve minimize foaming and
aeration to help make sure the ride stays consistent, even under rough
conditions. When you want to blend new vehicle ride qualities with more
control, you want KYB GR-2 gas series complete struts.
 |
$349.00 |
KYB GR2 Struts
for Legacy 90-1991 Set of 4 '2WD and AWD'
GR-2 gas shock complete struts are affordably priced, twin
tube designs that blend a smooth ride quality with enhanced road control. A
low-pressure gas charge and patented check valve minimize foaming and
aeration to help make sure the ride stays consistent, even under rough
conditions. When you want to blend new vehicle ride qualities with more
control, you want KYB GR-2 gas series complete struts.
 |
$399.00 |
KYB GR2 Struts
for Impreza 93-2001 Set of 4 '2WD and AWD'
GR-2 gas shock complete struts are affordably priced, twin
tube designs that blend a smooth ride quality with enhanced road control. A
low-pressure gas charge and patented check valve minimize foaming and
aeration to help make sure the ride stays consistent, even under rough
conditions. When you want to blend new vehicle ride qualities with more
control, you want KYB GR-2 gas series complete struts.
 |
$349.00 |
KYB AGX
Adjustable Struts for Impreza AWD
93-2001 Set of 4. KYB AGX shock absorbers allow easy adjustment of the shock
damping rate to tune the vehicles performance to meet the needs of the street, strip
or track. KYB AGX Adjustable Gas shock absorbers are externally adjustable, so there is no
need to disconnect or remove anything to change settings. Depending on the vehicles
configuration, the damping rate is selected with an external knob on the side of the shock
body or through a screwdriver inserted into a slot at the top of the struts piston
rod. The KYB AGX shock absorbers single damping adjustment changes the shocks
compression and rebound resistance at once.
 |
$579.00 |
Koni Sport Shock
Insert for
Impreza "Front"
sold as a pair. KONI
Sport shock absorbers (painted yellow) were developed for sporting drivers
by focusing on exceptional road holding and handling properties, combined
with an acceptable level of comfort. KONI
Sport shock absorbers are designed for performance street driving.
 |
$410.00
(Pair) |
Koni Sport Shock
Insert for
Impreza. "Rear"
sold as a pair. KONI
Sport shock absorbers (painted yellow) were developed for sporting drivers
by focusing on exceptional road holding and handling properties, combined
with an acceptable level of comfort. KONI
Sport shock absorbers are designed for performance street driving.
 |
$410.00
(Pair) |
Coilover Kits
Flex Type Coilovers
for Impreza and Legacy. The TEIN Type
FLEX damper kit was designed to provide driving comfort and sports
performance with its full-length adjustment system. TEIN
has incorporated separate height and preload adjustments, which
allows you to have various set-ups to meet different road conditions. The
FLEX Damper kit includes pillow ball upper mounts and is compatible with the
EDFC, for maximum performance for the streets. Full-length adjustment and
height adjustment for separate setting of the height and spring preload.
16 levels of damping force adjustment (compression and rebound
together). Teflon coating for rust prevention. Newly designed spring seat
and spring seat lock for easy height adjusting. Pillow ball upper mounts are
included. * Compatible with EDFC. Available for overhaul.

Contents of damper kit Adjustable shock absorber x4, Main
spring x4 Lower spring Seat x4,Spring Seat lock x12 Bump rubber x4, Dust
cover x4 Hook spanner x2, Instruction manual |
$2050.00
$1849.00 |
EDFC Unit
for Flex Type Coilovers.
EDFC (Electronic Damping Force Controller) makes it possible
for the driver to control the damping force by controlling a motor installed
in the shock absorber while being seated in the driver's seat. Since the
damping force can be manually controlled with ease to meet different
situations, the driver can enjoy variations in the suspension setting. EDFC
is developed based on the following concept Easily controlled from the
inside To control the damping force, the driver does not need to raise the
hood or take off rear interior parts such as the speaker board or rear seat.
All a driver is required to do is simply operate a button while being seated
in the driver's seat.
 |
$418.00
$389.00
|
**TERMS AND
CONDITIONS**
  
* Prices are subject to final approval.
Please email to confirm all prices.
|